FEELSCAPE Spatial sense meter Android 8.0+ by EV7LAB

Read the senseof a space

FEELSCAPE measures noise, light, crowding, air pressure and vibration for 30 seconds with the sensors already in your phone, and rates the load a space puts on your senses as a 0–100 index. Everything is computed on the device.

SENSE INDEX · DRAG34잔잔
020406080100
Sample live readingsupdated every second
01Method

Put it down.
The phone measures.

  1. T − 3 s

    Placement

    Lay the phone flat, screen up. After a countdown (3 seconds by default; 0, 3, 5, 10 or 15 in Settings) a start tone plays and the microphone opens.

  2. T + 0 s

    Measuring

    The screen goes black at minimum brightness so its own light stays out of the lux reading. Audio is never recorded, only sound levels, second by second. Tap the screen for time left and a stop button.

  3. T + 30 s

    Result

    Two tones and a short vibration mark the end (skipped in silent or Do Not Disturb). You get per-factor scores, the main cause and suggestions. Observe mode runs 5 minutes for duration and variability.

0–20Quiet

Almost no stimulus. Suited to rest and focus.

21–40Calm

Mild stimulus, still comfortable.

41–60Stir

Noticeable. Tiring over long stays.

61–80Noisy

Busy. Fatigue builds quickly.

81–100Turbulent

Heavy load. Moving elsewhere is advised.

02Metrics

Eight quantities measured,
six weighed into the index.

Which sensor reads what, factor by factor. If a phone lacks a sensor, that factor is left out and never filled in with a guess.

FactorSensorWhat it readsIndex
NoiseMicrophoneWeighted sound level, sudden and low-frequency noise (WHO guidelines as reference)scored
LightAmbient lightWhether brightness suits the time of day, sudden changesscored
CrowdBluetooth LENearby Bluetooth devices and how often they changescored
PressureBarometerCurrent pressure and recent trendscored
VibrationAccelerometer · gyroVibration through floors and structures (handheld time excluded)scored
Temp · humidityTemperature · humidity sensor (if present)How far temperature and humidity are from the comfort rangescored
MagneticMagnetometerNearby metal and electronics vs. Earth’s fieldreference
AltitudeBarometer + GNSSAltitude and estimated floorreference
03Floor estimate

Where you measured,
and on which floor.

Each measurement stores coordinates and altitude from GNSS and the barometer, and the result shows the estimated floor with its basis. Coordinates are used only for floor estimates and stay on the device.

  • Floor estimateNearby readings taken around the same time are compared by air pressure to estimate the floor.
  • Set floorEnter the real floor once and nearby readings are recalculated from it. The basis is shown next to each floor.
  • AccuracyAltitude is above mean sea level, not above the ground. The !Accuracy note explains the limits.
5F (set by you)Floor you entered
5F (from set floor)Estimated from that reading
about 5FLowest reading taken as 1F
04Live

No button.
This room, right now.

Every sensor, live, with the orb reacting as values change. Nothing here is saved.

  • Live sensorsNoise, light, crowd, pressure, magnetic field, vibration
  • Altitude · floorsAltitude, change since start in metres and floors, vertical speed
  • MotionStill, walking, stairs, elevator, escalator or in hand, with a safety reminder while moving
  • Nearby devicesBluetooth and Wi-Fi by signal strength; earbuds and watches connected to this phone listed as “Connected”. Names are only shown, never stored
05Sleep mode

While you sleep,
it logs the bedroom.

Leave the phone by the pillow: it samples noise, light and movement for 10 seconds every minute, and reports in the morning.

  • Environment scoreSound, light, unbroken quiet and stillness, plus the 7-night trend
  • Disturbing soundsLoud events grouped with time, length, peak and whether you moved after
  • Light · backgroundTime to darkness, dawn light, steady background hum
  • Sounds heard (AI)On-device AI models (YAMNet·EfficientAT) show the sound names they detect (521 types) as they are, and an on-device helper double-checks look-alikes such as running water and rain. Snoring spans are marked
  • Gaps flaggedShows where power saving paused logging
06Noise log

Every impact, timed and
checked against the standard.

Leave the phone on the floor to log impacts and sudden noise from neighbours: times, levels and an on-device AI estimate of the sound type, never audio.

  • Floor-noise standardKorea’s 2023 standard: 1-min Leq 39/34, Lmax 57/52 dB(A) (3+ times an hour), 5-min Leq 45/40, day/night
  • Impact detectionFloor vibration from the accelerometer separates impacts from low-frequency hum
  • Sound types (AI)Each event is tagged as footsteps, thuds, dragging, voices, music/TV and more. It can’t tell which flat a sound came from
  • PDF reportStandard comparison, hourly chart, full event list and gaps, plus recording conditions (device, calibration) and a record check code
07Verification

Numbers you can
check yourself.

Phone sensors vary by model, so you can export your readings and calibrate against a reference meter.

  • CSVExport readingsExport readings as CSV and check them in any spreadsheet.
  • CALIBRATIONMic calibrationEnter a reference meter’s reading and the model offset (dB) is computed for you.
  • SOURCEAltitude source shownEach result says whether altitude came from GNSS + barometer, a recent GNSS calibration or the standard atmosphere.
  • LIMITSStated limitsAltitude, floor and device-detection limits are explained on the spot via !Accuracy.
08Index

From one reading
to daily rhythm.

Sense typeLog how a space felt for a personal index and one of six sense types.
Pressure alertsWarns of fast pressure drops; silent at bedtime.
History · comparePlace averages, side-by-side compare, daily timelapse, per-section editing.
Auto placeRecognises places you measured before from Wi-Fi patterns, stored only as hashes.
Observe mode5 minutes: noise duration, spread (L10−L90), sound–vibration correlation.
Widgets · themesResizable widgets, six themes, shareable result cards.
BackupOne file backs up and restores records and settings.
ExplanationsThe heaviest factors explained against references (WHO bedroom guideline, reading light) with practical tips; optional Gemini Nano wording on supported phones.
PatternsStatistics over your records: when impacts cluster, what lowered sleep scores, how places differ by time of day.
On-device AIAn optional Google Gemma download (E2B under 11 GB of memory, E4B at 11 GB or more) writes suggestions, period reports, answers and photo, video and sound analyses on the phone. Question history stays on the phone and can be re-asked or deleted.
Result viewsSee one reading as the orb, a flow graph, a waveform or a sound terrain. Flow-graph bands stream live and replay the measurement on the result screen.
Two sounds at onceOverlapping sounds such as speech over music are shown together, e.g. Speech · Music.
Wi-Fi signal map (AR)Point the camera around and record Wi-Fi strength at each spot as colored spheres (ARCore devices).
Access · languagesPermissions explained up front, TalkBack reads the orb and charts, ten languages.
09Privacy

Your readings
stay on the phone.

No server ever receives your readings. These six are the only uses of the internet; the AI model download applies only if you choose it, AI wording only if you turn it on, and payment only if you buy Pro.

Leaves the phone6

  • Ad requestsGoogle AdMob. Readings are never used for ads.
  • NoticesFirebase Cloud Messaging (Google): a device token for delivery only; no readings or history.
  • Free-use checkWithout Pro, starting a measurement or PDF sends only an irreversible device code, the date and the feature name to the FEELSCAPE server (Cloudflare) to count daily uses. No readings; deleted after 3 days.
  • Pro payment (if bought)Google Play handles payment; the app only checks whether Pro was bought and never sees payment details.
  • AI model download (if chosen)The Gemma model file (E2B about 2.6 GB, E4B about 3.7 GB) comes from our server (dl.ev7lab.com, Cloudflare R2). Records and questions are not sent.
  • AI wording (if on)Google ML Kit (Gemini Nano) sends device info and usage statistics. Text is generated on the phone; readings and explanations are not sent. Off by default.

Stays on the phone7

  • Readings, raw data, historyIndex, factor values, place names, feelings
  • Coordinates, altitude, floorUsed only for floor estimates and kept on the device.
  • Camera imageUsed on the device only for AR tracking and video analysis, then discarded.
  • AI questionsQuestions and answers are kept only on the phone and can be deleted one by one.
  • SoundNever recorded; only levels (dB) and the sound names detected on the phone are kept.
  • Space explorationRoom echo (reverberation time), walks (a relative path from the start, no GPS) and the levels, per-band levels and sound type names behind the waveform and sound terrain are kept as numbers and names only. The test sound is never recorded, and turn-around scan results are not saved.
  • Nearby device namesShown, never stored; Wi-Fi identifiers kept only as irreversible hashes.
About readings

FEELSCAPE uses the phone’s built-in sensors. Depending on sensor quality, model, placement and calibration, readings may differ from professional instruments and must not be used for legal, medical or safety decisions.

Don’t watch the screen while walking, on stairs, escalators or near traffic.

10FAQ

Frequently asked questions

What is FEELSCAPE?

An Android app that measures noise, light, crowding, air pressure and vibration with your phone's built-in sensors for 30 seconds and rates the load a space puts on your senses as a 0-100 Space Sense Index. It shows in numbers why a cafe, library, office or room feels tiring.

How accurate is a phone as a noise (decibel) meter?

FEELSCAPE computes the sound level from the microphone every second and shows it in dB(A). Readings can differ by a few dB between phone models, so you can calibrate the microphone in Settings. It does not replace a professional sound level meter and must not be used for legal decisions.

Does it record audio?

No. Only sound level and sound type are computed on the phone every second, and audio is never saved. Readings are not sent to any server.

Which sounds can it recognise?

On-device AI estimates the type of sound every second, such as speech, music or running water, and shows its name. When two sounds overlap, like dialogue over music, both are shown together, e.g. "Speech · Music". These are AI estimates and can be wrong.

Can I use it to log neighbor noise?

The neighbor-noise log records when each impact sound happened and how loud it was, compares it with legal limits and puts the result in a PDF report. It does not replace measurements from a certified instrument.

Can it check my bedroom while I sleep?

Sleep mode records the noise and light in your bedroom while you sleep and marks snoring sections.

What is the wireless signal map (AR)?

Point the camera around the room and FEELSCAPE records Wi-Fi signal strength at each spot and overlays it as colored spheres. The access point you are connected to is shown in its own color. It works on ARCore-supported devices.

Is it free?

You can install and use it for free with a daily usage limit. To use it without limits, you can buy the Pro lifetime pass in the app.

Which devices are supported?

Android 8.0 or later, in 10 languages. There is no iPhone version yet.

The places you spendyour day, measured.

Get it on Google Play Android 8.0+ · 10 languages